Dillon Quick-Check Wire Tension Meter (Old) Instrukcja Użytkownika Pobierz pdf (Strona 15)

Quick-Check User Instructions 15

Temp Press this softkey to choose the source of the temperature reading, the

Quick-Check itself (Meter), outside input (Input) or None. If you choose

Input, you are prompted to enter the temperature. When finished, press

the Enter softkey to accept this value.

Next you are prompted to choose Fahrenheit or Centigrade as the

temp

erature unit. When your choice is highlighted, press the Enter

softkey.

An annunciator shows when temperature has been manually entered. See

xample below:

Temperature Display Mode

Auto-off can preserve battery life.

Setup Press the Setup softkey and you will see these choices; Off, PtFmt, Misc,

About, and Test. These are described below:

Off Press

this softkey to enable or disable the auto-shutdown function.

If you choose Yes, you are asked to set a period of time in

minutes. Next, press the Enter softkey to accept this value. You

are then asked to set the shutdown type; Fixed, No Load, or No

Change. These are described below;

Fixed - The unit will shut

down after the set number of minutes no

matter what happens.

No Load - The

unit will shutdown after the set number of minutes

only if there is no load on the unit. This prevents shutdown in the

middle of a test.

No Change - The unit will shut

down if there has been no keypad

activity or change in tension after the set number of minutes.

PtFmt Not cu

rrently used.

Misc Press

this softkey to set the following:

Flash - Enab

les or disables the momentary blinking of the display

to acknowledge a key press.

Zero - En

ables the use of the Zero softkey to clear a peak tension

value.

Contr - Pre

ss this key to adjust the contrast of the LCD display.

Press the Up soft key to lighten the contrast. Press the Down

softkey to darken the contrast.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Komentarze do niniejszej Instrukcji

Brak uwag

Dillon Quick-Check Wire Tension Meter (Old) Instrukcja Użytkownika Strona 15

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Dillon Quick-Check Wire Tension Meter (Old)