Dillon EDXtreme (Red) Instrukcja Użytkownika Pobierz pdf (Strona 20)

EDXtreme User Instructions 19

3 EDX Operation

The EDXtreme uses a menu system to perform specific functions or make changes to

the configuration. Refer to Figure 3.1 for the user menu diagram.

Figure 3.1 User Menu

Units Press the Units key to choose one of the following units; lbf, kgf, N.

Print Press the Print key to send to a peripheral device such as a printer, remote

display or computer. (Also used to start and stop when using “Timed”

under Log.

Mode Press the Mode key to select between force, peak or force/peak modes.

Clear Press the Clear key to clear the Peak weight.

Log Press the Log key to configure and view data logging settings. See section

3.4.

Setup Press the Setup key to access the Setup menu and configure logging

function.

Config Press the Config key to access the Configuration menu.

3.1 Display Modes

The EDX has several display modes accessible by pressing the Mode soft key. See

Figure 3.2.

The first display mode when you power up is the live force measurement mode.

Press

Arrow

Key

Units Print Mode Clear

Log

Setup ID Send Clear

Log Mode

Disable On Print On Lift Timed Overload

Auto ID increment

(Enabled,

Disabled)

Auto ID prompt

(Enabled,

Disabled)

Log rate (sec)

Log count

(1 to 255)

Auto send

(Disabled,

Enabled)

Comm port

(Disabled, Cell,

COM1, RADIO)

Threshold%

Re-arm%

Auto ID increment

(Enabled,

Disabled)

Threshold%

Re-arm%

Holdoff Seconds

Comm port

(Disabled, Cell,

COM1, RADIO)

Comm port

(Disabled, Cell,

COM1, RADIO)

Setup Config

See Config

section

See Setup

section

ONLY APPEARS

IF AUTO ID

INCREMENT IS

DISABLED

Comm port

(Disabled, Cell,

COM1, RADIO)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 66 67

Komentarze do niniejszej Instrukcji

Brak uwag

Dillon EDXtreme (Red) Instrukcja Użytkownika Strona 20

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Dillon EDXtreme (Red)